Honda CBR1000RR Owner's Manual page 41

Instruments
Setting Mode B
1 Setting of REV indicators:
You can change the setting of the REV
indicators.
!a To change the setting mode B, turn the
ignition switch to ON while pressing
button until the display check is finished.
The blinking of bar segment in the
tachometer shows the currently applied
blinking RPM, and the numerical
tachometer display shows it. At the same
time, all of the REV indicators blink.
SEL button
Tachometer
38
SEL
REV indicators
Numerical tachometer
display
!b Each time SEL button is pressed, the
blinking RPM set value increase by 200 r/min
(rpm) (one segment). When the set value
exceeds the allowable range, the RPM set
value automatically returns to 4,000 r/min
(rpm).
u Press and hold to advance the blinking
RPM setting value fast.
Available Setting Range
Except F, II F, III F and KO, III KO types
4,000 -to- 13,000 r/min (rpm)
F, II F, III F type only
4,000 -to- 12,000 r/min (rpm)
KO, III KO type only
4,000 -to- 12,600 r/min (rpm)