Tyre Puncture
u
9. Install the left brake caliper and tighten
the mounting bolts.
CBR1000RR/RA
Torque: 45 N·m (4.6 kgf·m, 33 lbf·ft).
CBR1000S/SA
Torque: 40 N·m (4.1 kgf·m, 30 lbf·ft).
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the brake caliper.
NOTICE
When installing the brake calipers into position on the
fork legs, carefully fit the brake disc between the pads
to avoid scratching them.
118
Removing Wheels
10. Lower the front wheel on the ground.
11. Apply the brake lever several times.
Then, pump the fork several times.
12. Retighten the left axle pinch bolts.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
13. Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.