Dodge 2009 Ram Truck Owner's Manual page 106

104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
• The system will prompt you to say the name of the
person you want to call.
• After the Ready prompt and the following beep, say
the name of the person you want to call. For example,
you can say John Doe, where John Doe is a previ-
ously stored name entry in the uconnect phonebook
or downloaded phonebook. To learn how to store a
name in the phonebook, refer to Add Names to Your
uconnect Phonebook, in the phonebook.
• The uconnect system will confirm the name and then
dial the corresponding phone number, which may
appear in the display of certain radios.
Add Names to Your uconnect Phonebook
NOTE: Adding names to the uconnect phonebook is
recommended when the vehicle is not in motion.
• Press the PHONE button to begin.
• After the Ready prompt and the following beep, say
Phonebook New Entry.
• When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say Robert Smith or
Robert instead of Bob.
• When prompted, enter the number designation (e.g.,
Home, Work, Mobile, or Pager ). This will allow
you to store multiple numbers for each phonebook
entry, if desired.
• When prompted, recite the phone number for the
phonebook entry that you are adding.
After you are finished adding an entry into the phone-
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.