Pontiac Montana SV6 2007 Owner's Manual page 390

Tire and Loading Information Label
Example Label
A vehicle specific Tire and Loading Information
label is attached to the center pillar (B-pillar) of your
vehicle. With the driver's door open, you will find the
label attached below the door lock post (striker).
The tire and loading information label shows the
number of occupant seating positions (A), and the
maximum vehicle capacity weight (B) in kilograms
and pounds.
390
The Tire and Loading Information label also shows
the size of the original equipment tires (C) and the
recommended cold tire inflation pressures (D). For
more information on tires and inflation see Tires on
page 459 and Inflation - Tire Pressure on page 466.
There is also important loading information on
the vehicle Certification/Tire label. It tells you the
Gross Vehicle Weight Rating (GVWR) and the
Gross Axle Weight Rating (GAWR) for the
front and rear axle. See "Certification/Tire
Label" later in this section.
Steps for Determining Correct Load Limit
1. Locate the statement "The combined weight of
occupants and cargo should never exceed
XXX kg or XXX lbs" on your vehicle's placard.
2. Determine the combined weight of the driver
and passengers that will be riding in your
vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX kg or XXX lbs.