Mitsubishi Electric PK-2.5FLD Technical & Service Manual page 4

PK-2.5FLD , PK-3FLD
2
Wireless remote controller
When cover is open.
display
OPERATION MODE display
Operation mode display indicates which op-
eration mode is in effect.
display
The vertical direction of air flow is indicated.
display
FAN SPEED display indicates which fan
speed has been selected.
ON/OFF button
The unit is turned ON and OFF alternately
each time the button is pressed.
FAN SPEED SELECT button
Used to change the fan speed.
MODE SELECT button
Used to switch the operation mode between
cooling, drying, fan.
CHECK-TEST RUN button
Only press this button to perform an inspec-
tion check or test operation.
Do not use it for normal operation.
VANE CONTROL button
Used to change the air flow direction.
, PK-4FLSD
2 2
CHECK TEST RUN
CHECK&TEST RUN display indicates that
the unit is being checked or test-run.
MODEL SELECT
Blinks when model is selected.
ON/OFF
MODE
CHECK
TEST RUN
SET
display
display
CHECK TEST RUN
MODEL SELECT ˚C
AMPM
AMPM
NOT AVAILABLE
TEMP
FAN AUTO STOP
VANE AUTO START
LOUVER h
min
RESET CLOCK
4
Part No.
[ T7W E06 714 ]
display
Lights up while transmission to the indoor
unit is mode using switches.
display
SET TEMP. display indicates desired temper-
ature set.
CLOCK display
Displays the current time.
TIMER display
Displays when in timer operation or when
setting timer.
" " " " display
Displays the order of timer operation.
" " " " display
Displays whether timer is on or off.
button
SET TEMPERATURE button sets any desired
room temperature.
TIMER CONTROL buttons
AUTO STOP (OFF timer): when this switch
is set, the air conditioner will be au-
tomatically stopped at the preset time.
AUTO START (ON timer): when this switch
is set, the air conditioner will be automatical-
ly started at the preset time.
h and min buttons
Buttons used to set the "hour and minute" of
the current time and timer settings.
LOUVER button
This switch the horizontal fan motion ON
and OFF.
(Not available for this model.)
CLOCK button
RESET button
SET button