Franklin DBD-1680 User Manual page 38

Using the Databank
4. To delete all databank entries,
highlight Erase the List in the
Databank menu and then press
EINGABE.
5. Press Y to erase all databank
entries or N to cancel the
deletion.
Using a Password
You can use a password to prevent
unauthorized access to the databank.
Warning! Always write the password
in a safe, separate location. If you
lose or forget the password, you will
be able to use the databank again
only by removing the batteries from
your device, which will permanently
erase all the information stored in the
databank.
1. Press
DATA.
Or you can press ORG, press
highlight Databank and then press
EINGABE.
and then press
Using the Databank
2. Press
and then press EINGABE.
3. Type a password of up to eight
characters and press EINGABE.
Use
to delete.
4. Press C to confi rm or CLEAR to
cancel the password.
The password you set will be
requested the fi rst time that the
databank is used during a session.
5. To change the password, repeat
Steps 1-4.
To remove a password, press
EINGABE at the blank password
screen.
to
87
to highlight Set Password
to move the cursor; use