Fiber ①
・Insert the fiber into the reflector unit.
* Note: Be careful NOT to bend the fiber while assembling work.
ND filter
Fiber
Wiring
・Attach the tetrone sheet E with the both-sided
adhesive tape E.
・Arrange wires by using the adhesive face of
the tetrone sheet.
・Attach the tape (TA-0001) on the arranged
wires.
・Bundle all wires together on the tape.
Be careful so that the wires are NOT piled up as far as possible.
TA-0001
Insert so that
the fiber is in
this position
Reflector unit
- A6 ・ SB-800 -
Adhesive: Screw Lock
Tetrone sheet E
Both-sided adhesive tape E
FSA03501-R.3613.A
TA-0001
Fiber
TA-0001