FSA03501-R.3613.A
H PCB
・Insert the zoom brush into place.
Zoom brush
H PCB
・Attach the H PCB with 2 screws (#65).
#65
Adhesive: Screw Lock
Motor unit attachment
・Assemble the motor unit into the reflector unit. Check if the pins of the reflector side plate are put in the driv-
ing mold grooves A.
Pins of the reflector side plates.
Driving mold grooves A
・Check if the lever of the Xe holder is put in the driving mold groove B.
・Attach the motor unit with screws (#78 and #31).
・Attach the K PCB with screw (#183).
Driving mold groove B
Lever of Xe holder
#78
#31
#183
K PCB
- A5 ・ SB-800 -