D-Link DSL-1500G++ User Manual page 55

hyperlink for the interface that you want to add a global pool to. The following page is
displayed:
Click on Add Global Address Pool. The following page is displayed:
2.
This page allows you to create a pool of network IP addresses that are visible outside
3.
your network. Add values for the following table entries:
• Interface type; the internal address type that you want to map your external global IP
addresses to. Click on the drop-down list and select an interface type.
• Use Subnet Configuration; there are two ways to specify a range of IP addresses. You
can either Use Subnet Mask (specify the subnet mask address of the IP address) or Use
IP Address Range (specify the first and last IP address in the range). Click on the
drop-down list and select a method.
• type in the IP Address that is visible outside the network
• Subnet Mask/IP Address 2; the value you specify here depends on the subnet
configuration that you are using. If you chose Use Subnet Mask, type in the subnet
DSL-1500G++ User Manual
- 55 -