Hardware Connection - D-Link DSL-1500G++ User Manual

4.
5.
6.

2.4 Hardware Connection

1. Connect the DSL cable to the DSL port of RJ-11 socket.
2. Use a RJ-45 cable to connect the DSL-1500G++ to the LAN or a PC with Ethernet
adapter installed.
3. Connect the power supply to DSL-1500G++ by plugging the round DC connector
into the DC jack on the rear panel. Plug the power supply into the wall. Verify that
the Power LED is illuminated or not. If the power LED is illuminated, this indicates
that the DSL-1500G++ is connected properly.
4. Ground the DSL-1500G++ by connecting a grounded wire
Note: Please use crossover RJ-45 to connect DSL-1500G++ to the HUB, if your hub is not
featured with auto sensing function.
DSL-1500G++ User Manual
Standard DSL line cable
support CD
QIG
Quick Installation Guide
- 16 -