System Audio Control; Setting The Speakers; Speaker Settings; Audio Return Channel - Sony HT-IV300 Operating Instructions Manual

Notes
• The above features may not operate with certain
equipment.
• Depending on the settings of the connected
equipment, the Control for HDMI function may
not work correctly. Refer to the operating
instructions of the equipment.

System Audio Control

You can enjoy the sound from TV or other
equipment by a simple operation.
You can use the System Audio Control
function as follows:
• When the system is turned on, the sound
of the TV or other equipment can be
output from the speakers of the system.
• When sound from the TV or other
equipment is output via the speakers of
the system, you can switch the sound to
output from the TV speakers by pressing
SPEAKERS TVyAUDIO.
• When sound from the TV or other
equipment is output via the speakers of
the system, you can adjust the volume
and turn off the sound of the system by
operating the TV.

Audio Return Channel

You can enjoy TV sound via the system by
using just one HDMI cable. For details of
the setting, see "[Audio Return Channel]"
(page 41).
Language Follow
When you change the language for the
on-screen display of the TV, the system's
on-screen display language is also changed
after turning off and on the system.
Routing Control
When you perform One-Touch Play on the
connected equipment, the system turns on
and sets the system's function to "HDMI1"
or "HDMI2" (depending on the HDMI
input jack in use), and your TV's input is
automatically set to the HDMI input to
which the system is connected.

Setting the Speakers

[Speaker Settings]

To obtain optimum surround sound, set the
speakers' distance from your listening
position.
1
Press HOME.
The home menu appears on the TV
screen.
2
Press B/b to select
3
Press V/v to select [Audio
Settings], then press
4
Press V/v to select [Speaker
Settings], then press
The [Select speaker layout.] display
appears.
5
Press V/v to select setting
according to your speakers
placement, then press
• [Standard]: The surround speakers
are installed in the rear position.
• [All Front]: All speakers are installed
in the front position.
Note
All settings are reset to default settings each
time you change the speaker layout setting.
6
Press V/v to select the item, then
press .
[Setup].
.
.
.
35
GB