Lincoln Electric RANGER 250 IM919 Operator's Manual page 31

Lincoln electric welding system user manual
Table of Contents

Advertisement

E-2
PROBLEMS
(SYMPTOMS)
Major Physical or Electrical
Damage is Evident.
Engine will not "crank".
Engine will "crank" but not start.
Engine shuts down shortly after
starting.
Battery does not stay charged.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
Observe all Safety Guidelines detailed throughout this manual
POSSIBLE
1. If all recommended possible
areas of misadjustment have
been checked and the problem
persists,Contact your local
Lincoln
Service Facility.
1. Battery is low.
2. Loose battery cable connections.
3. Faulty engine starter motor.
4. "Battery Circuit" circuit breaker is
tripped.
1. Out of fuel.
2. Faulty fuel solenoid or faulty PC
board or ignition system.
3. Fuel pump not working.
1. Low oil level.
2. Faulty oil pressure switch or
other engine component.
1. Faulty battery.
2. Loose connections at battery or
alternator.
3. Faulty engine alternator or
charger module.
RANGER® 250
CAUSE
Authorized
Field
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
CAUTION
RECOMMENDED
COURSE OF ACTION
E-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger 250

Table of Contents