Electrical Adjustment; Q Q; Power Supply Check - Sony RMT-D145E Service Manual

Cd/dvd player

Table of Contents

3 7 63 1515 0

In making adjustment, refer to 7-3. Adjustment

Related Parts Arrangement.

Note: During diagnostic check, the characters and color bars can be seen

only with the NTSC monitor. Therefore, for diagnostic check, use

the monitor that supports both NTSC and PAL modes.

Use the reference disc for PAL for check, and use the reference disc

for NTSC for adjustment.

This section describes procedures and instructions necessary for

adjusting electrical circuits in this set.

Instruments required:

Color monitor TV

Oscilloscope 1 or 2 phenomena, band width over 100 MHz,

with delay mode

Frequency counter (over 8 digits)

Digital voltmeter

Standard commander (RMT-127E)

DVD reference disc

HLX-501 (J-6090-071-A) (dual layer) (NTSC)

HLX-503 (J-6090-069-A) (single layer) (NTSC)

HLX-504 (J-6090-088-A) (single layer) (NTSC)

HLX-505 (J-6090-089-A) (dual layer) (NTSC)

HLX-506 (J-6090-077-A) (single layer) (PAL)

HLX-507 (J-6090-078-A)(dual layer) (PAL)

SACD reference disc

HLXA-509 (J-6090-090-A)

Extention Cable (J-6090-107-A)

L 13942296513

www

http://www.xiaoyu163.com