Table of Contents
Advertisement
A-6
Line Cord Connection
A 3 conductor international cordset with a 16 amp,
230 volt, two-prong plug is factory installed. Connect
this plug to a mating grounded receptacle which is
connected to an appropriate power supply per any
applicable local codes.
Type 75°C
Wire in Conduit,
Input
Copper Cond.
Voltage
Hertz
AWG Size
230
50/60
WARNING
This welding machine must be connected to a
power source in accordance with applicable elec-
trical codes.
The National Electrical Code provides standards
for amperage handling capability of supply con-
ductors based on duty cycle of the welding
source.
If there is any question about the installation
meeting applicable electrical code requirements,
consult a qualified electrician.
INSTALLATION
Grounding
Wire
Fuse
Copper
Size
Cond.
(Super
AWG Size
Lag)
8
10
40
CONNECT TO A SYSTEM
GROUNDING WIRE. SEE
THE UNITED STATES
NATIONAL ELECTRICAL
CODE AND/OR LOCAL
CODES FOR OTHER
DETAILS AND MEANS FOR
PROPER GROUNDING.
CONNECT TO HOT WIRES
OF A THREE-WIRE SINGLE
PHASE SYSTEM OR TO
ONE PHASE OF A TWO OR
THREE PHASE SYSTEM.
SP 170-I
A-6
Advertisement
Table of Contents
