Centre High-Mounted
Brake lamp (CHMBL)
<Bulb type>
1. Open the tailgate.
2. Remove the two screws and the
lamp housing. Disconnect the
wiring harness connector before
removing the lamp housing.
3. Remove the two screws and the
reflector assembly.
4. Remove the bulb by pulling it
straight out of the bulb holder.
5. Install a new bulb.
6. Reinstall the lamp housing.
<LED type>
Have bulbs replaced by a workshop.
Number Plate Lamp
1. Unscrew both screws.
2. Remove bulb housing
downward, taking care not to
pull on the cable.
Rotate bulb holder anticlockwise
to disengage.
Vehicle Care
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb
housing and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Interior Lamps
Courtesy lights
1. To remove it, prise the opposite
side of the light switch using a
flat-blade screwdriver. (Be
careful not to make scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the light assembly.
10-23