Clock - Chevrolet 2015 Spark Owner's Manual

5-6 Instruments and Controls
Caution
Do not operate the windscreen
washer continuously for more
than some seconds, or when the
washer fluid tank is empty. This
can cause the washer motor to
overheat resulting in costly
repairs.

Clock

<Type 1>
<Type 2>
Time is shown in the cluster.
If the clock is not equipped in the
cluster, time is shown in the
information system.
Set time
<Type 1>
Push the CLOCK button of the
cluster for more than 1 second.
When the hour display flashes,
adjust the current hour using the
CLOCK button.
After approximately 1 second, the
minute display will flash
automatically then adjust the current
minute using the CLOCK button.
The setting will be finished without
any operation a few seconds after
adjusting.
<Type 2>
Press MENU button until the lower
display area flashes.
Press the SET/CLR button for more
than 2 seconds and then it shifts
into the setting mode.
When the hour display flashes,
select the hour by using the
button (if the hour display flashes
without any operation for more than
30 seconds, the time will return to
the setting mode entry time)
Press SET/CLR button after
selecting the hour and then the
minute display is flashing.
Select the minute by using the
or button (if the minute display
flashes without any operation for
or