Unit Display Panels; Remote Control Display - Carrier Comfort 38MVC Series Owner's Manual

UNIT DISPLAY PANELS

NOTE: The display panel on the indoor unit will look like one of the following. Some of the functions will appear on the display
panel, remote control or both.
On the Unit:
Infrared signal receptor
OPERATION
TIMER OPERATION
PRE-DEF
C o o lin g / H e a tin g
OPERATION AUTO
C o o lin g O n ly
OPERATION AUTO
18K - - 24K

Remote Control Display

1
DIGITAL DISPLAY area: What is displayed in this area depends on the mode in which the unit is running in. The set point will
show if the unit is running in any mode besides Fan Only Mode. When the unit is running in Fan Only mode, nothing is displayed.
When Timer is on, TIMER ON OFF indicator will appear.
2
TRANSMISSION Indicator: This indicator flashes once when remote control transmits signals to the indoor unit.
An audible "beep" will also be heard.
3
ON/OFF Indicator: This symbol appears when the unit is turned on by the remote control, and disappear when the unit is turned
off.
4
OPERATION MODE Indicator: Shows the current operating mode - -- - "AUTO", "COOL", "DRY", "HEAT" (Cooling only model
without), or "FAN".
5
LOCK Indicator: Appears when settings are locked.
6
TIMER DISPLAY Indicator: Displays "TIMER ON","TIMER OFF", "TIMER ON- -OFF" when both are used.
7
FAN SPEED Indicator: Indicates fan speed selected. If "AUTO" is selected, nothing is displayed.
NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols are
displayed.
AUTO
TIMER
ECON
PRE-DEF
A07545
9K
Infrared signal receptor
A07544
12K
TIMER PRE.-DEF.
TIMER FAN ONLY
A07546
1
DIGITAL
DISPLAY area
TRANSMI-
2
SSION Indicator
OPERATION
4
MODE Indicator
5
LOCK Indicator
TIMER
6
DISPLAY Indicator
OPERATION:
This indicator flashes once per second after power is on and
illuminates when the unit is in operation.
TIMER:
This indicator illuminates when TIMER is set ON or OFF.
PRE.- -DEF indicator (heat pump units only):
Pre- -Def indicator illuminates when the coil is warming up to
prevent cold blow or when unit goes into defrost mode.
AUTO indicator:
When air conditioner is set to AUTO mode, the indicator
illuminates.
FAN ONLY indicator:
When air conditioner is set to FAN ONLY mode, this indicator
illuminates.
NOTE: All the pictures in this manual are for demonstration
purposes only. The actual shape of your air conditioner may
be slightly different, but the operation instructions are the
same.
Display Panel
3
ON/OFF Indicator
4
OPERATION
MODE Indicator
7
FAN SPEED Indicator
TIMER ON OFF
4
A07540