Lincoln Electric SVM138-A Service Manual page 48

C-4 C-4
ACCESSORIES
UNIVERSAL WIRE REEL STAND (K1524-1)
Includes a 2" (51mm) O.D. Spindle with adjustable
brake and two locations for mounting the spindle to
allow for the mounting of 50 - 60lb, 10 - 30 lb, 13 - 14lb,
and 8" O.D. coils with proper spindle adapters. (See
OPERATION section) Capable of being mounted on
the top of a suitable power source or surface without
the need for any other mounting kit. Optional features
available for this stand include:
• K1555-1 insulated lift bale
• K1556-1 caster kit
• K1557-1 swivel platform.
K1551-1 Insulated Lift Bale: Provides a bolt on lift
bale with an electrically insulated lift hook.
K1556-1 Caster Kit: Comes with 4 light duty 2" O.D.
casters which mount in place of the rubber feet on the
wire stand. Use in light duty applications where porta-
bility is required. Can be used in combination with the
K1557-1 swivel platform.
K1557-1 Swivel Platform: Allows for the mounting of
the wire feeder reel stand assembly on top of a suitable
power source if the need for the wire feeder reel stand
assembly to swivel is desired. Also has mounting
holes in the base feet for mounting to any surface that
it can be fastened to. Comes with a rotating tool tray
to hold gun tips, guide tubes, drive rolls, etc. Will work
in combination with the K1556-1 caster kit.
LN-9 GMA Wire Feeder