T1 Transformer Removal And Replacement - Lincoln Electric SVM138-A Service Manual

F-59

T1 TRANSFORMER REMOVAL AND REPLACEMENT

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 216-383-2531 or 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will help the technician remove the T1 Transformer for repair or
replacement.
MATERIALS NEEDED
Soldering iron
Phillips head screwdriver
Slot head screwdriver
Needle nose pliers
5/16" Wrench
11/32" Wrench
TROUBLESHOOTING & REPAIR
WARNING
This procedure takes approximately 25 minutes to perform.
LN-9 GMA Wire Feeder
F-59