Specify Audio Feedback Options
All the actions you perform in the shutters result in an audible beep. The
beep volume in the 5235 IP Phone is related to the volume of the speaker.
You can specify the beep volume using this procedure; however, adjusting
the speaker volume also affects the beep volume.
To adjust the volume of the audio feedback:
1. Open the Settings shutter.
2. Press the scroll buttons (
3. Press the Audio Feedback setting.
4. Set the options using the appropriate actions described below:
Option
Turn audio feedback
off for errors
Adjust audio for errors Press a button between Low and High for Error
Turn audio off for
button actions
Adjust audio for
button actions
5. Click Save.
Note: Press Cancel at any time to exit this shutter without making any
changes.
) until the Audio Feedback setting is listed.
Action
Press Off for Error Beeps
Beeps
Press Off for Button Beeps
Press a button between Low and High for Button
Beeps
-26-