Hide thumbs Also See for UF-9000:
Table of Contents

Advertisement

The Firmware in the table below are not interchangeable.
Firmware for machines with Serial No. prefix
other destinations). (Navy Blue Control Panel), cannot be used on machines with Serial No.
prefix
BF [February
2006] and below for USA/Canada (may differ for other destinations).
(Light Blue Control Panel).
Parent Firmware File Folder
\ UF-9000_AUR_xxxxxx
(Navy Blue Control Panel)
\ UF-9000_AU_xxxxxx
(Light Blue Control Panel)
\ DP-190_180_xxR_xxxxxx
(Navy Blue Control Panel)
\ DP-190_180_xx_xxxxxx
(Light Blue Control Panel)
Note:
1. Manual mode must be used, when updating the designated version of the firmware or changing
the type of the firmware.
Please refer to the Section 2.2, "Setting up the Network Firmware Update Tool, File Selection
Tab" of the Operating Instructions.
2. While updating the firmware code, the display may become garbled, however, it will return to
normal upon completion of the firmware update.
3. If the firmware update fails, and the unit does not boot up, the Network Firmware Update Tool will
not be able to transfer the firmware code. If this occurs, please refer to the next section
"Updating through the USB Port", and use the Local Firmware Update Tool to recover the unit.
4. The suffix "_xx" for the Folder Name or File Name may not exist depending on the destination
location.

Ver. 3.0

CF [March
2006] and above for USA/Canada (may differ for
Sub Firmware File Folder
\ SC_STD \ DX-TrirAxVxxxxx_xx
\ SC_PCL \ DX-TrirBxVxxxxx_xx
\ SC_PS \ DX-TrirDxVxxxxx_xx
\ SPC \ DX-TRI-SAxVxxxxx
\ SC_STD \ DX-TriAxVxxxxx_xx
\ SC_PCL \ DX-TriBxVxxxxx_xx
\ SC_PS \ DX-TriDxVxxxxx_xx
\ SPC \ DX-TRI-SAxVxxxxx
\ SC_STD \ DP-TrirAxVxxxxx_xx
\ SC_PCL \ DP-TrirBxVxxxxx_xx
\ SC_PS \ DP-TrirDxVxxxxx_xx
\ SPC \ DX-TRI-SAxVxxxxx
\ SC_STD \ DP-TriAxVxxxxx_xx
\ SC_PCL \ DP-TriBxVxxxxx_xx
\ SC_PS \ DP-TriDxVxxxxx_xx
\ SPC \ DX-TRI-SAxVxxxxx
When you select the Parent Folder, the following Firmware Type
window appears. Proper Sub File Folders are selected automatically
by selecting the Firmware Type.
The transferring order is set up automatically.
266
User
Transferring Order
Authentication
X
X
X
X
X
X
UF-9000
DP-180/190
1
1
1
2
1
1
1
2
1
1
1
2
1
1
1
2
APR 2006

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-180Dp-190

Table of Contents