Setting Up Your First Heos Homecinema - Denon HEOS Owner's Manual

Contents

SETTING UP YOUR FIRST HEOS HOMECINEMA

Once you have placed your HEOS HomeCinema in your listening room and have downloaded the HEOS app, you are ready to configure your HEOS
HomeCinema for music playback. This involves following a few simple steps to get the speaker connected to your existing home network:
Caution
DO NOT connect the Ethernet cable if you are connecting your HEOS HomeCinema to a wireless network. If you are connecting the speaker to a wired
network, use an Ethernet cable to connect the speaker to your network or router.
1
Make sure your mobile device is connected to your
wireless network (the same network you want your
speakers connected to). You can check this in the
Settings - Wi-Fi menu of your iOS or Android device.
NOTE
If your wireless network is secure, make sure you know the password to join
your network.
2
Make sure you have the included
Audio/Setup cable handy.
3
Launch the HEOS app on your
mobile device.
Setup Setup Use Troubleshooting
4
Tap the "Setup Now" button at the top of the screen.
5
Follow the instructions to add the HEOS HomeCinema
to your wireless network and to select an input on your
HEOS HomeCinema. (The Wi-Fi settings from your
mobile device will be copied to the HEOS HomeCinema
via the audio cable.)
NOTE
If you have any problems connecting your HEOS device, jump to the
Troubleshooting section (v p. 52).
19
Status LED Appendix