Lincoln Electric SHIELD-ARC SVM128-A Service Manual page 100

F-46
31. Re-attach the positive output terminal cable.
32. Attach the cable retainer to the fuel tank rail. Set
the fuel tank into position on the rails and secure it
with the four bolts, washers, and nuts.
33. Attach the fuel return line at the top of the fuel
tank. Remove the plug from the fuel line and
attach it to the fuel bowl.
34. Perform the replacement procedures according to
each of the following:
Alternator Stator Removal and Replacement
Alternator Rotor Removal and Replacement
Before installing the machine case top and sides,
be sure to replace any cable ties cut during disas-
sembly.
TROUBLESHOOTING & REPAIR
GENERATOR FRAME REMOVAL
AND REPLACEMENT (continued)
SA-250
F-46