Testing Equipment - Compaq 800 Series Setup Manual

P M I PC B
RESARIO OBILE NTERNET
800 SE
RIES
The Test tab has the following main regions: Types of Test, Test
mode, an Information Window, and a Component List (under the
Type of Test box). The Component List resembles Windows
Explorer: Click the
component for information about it. The information window
may show further tests that can be performed on certain
components. You can request any or all of the subtests.

Testing Equipment

To run a test, complete the following steps:
1. Click the Test tab.
2. Choose the type of test: Quick, Complete, or Custom. In
Custom, you will need to check the boxes in the Component
List for each test you want.
3. Select Interactive mode or Unattended mode.
4. Click the Begin Test button at the bottom of the window.
The Status tab automatically replaces the Test tab on your
window. You can follow the progress of individual tests on
this window.
When the tests are complete, the progress bar in the Status
window is green if the test is successful and red if the test fails.
The lower part of the Status tab provides details of the tests that
are completed.
The Long tab lists all the tests and also provides information
about the number of times each test was run, the time taken for
the test, and the number of errors detected. You can save this
information by clicking the Save button at the bottom of the
window.
The Error tab provides details about the errors detected,
including error codes. These error codes reveal useful
information that a Compaq technician uses to advise you
on how to correct problems with your Notebook.
S G
EYOND ETUP UIDE
+
to open a component folder, then the
S S 8-11
ERVICE AND UPPORT