Before you begin
XEROX 4213 LASER PRINTER USER GUIDE
If you do not wish to install the Coax/Twinax board yourself, call
your service representative, and for a nominal charge, a
representative will be sent to perform the installation for you.
If you choose to install this option yourself, refer to the following
instructions.
Perform the following steps before beginning the Coax/Twinax
board installation procedures. Refer to figure A3-3.
1. Power off the printer.
2. Remove any font cartridge from the printer.
Figure A3-3.
Front and back views of the 4213 laser printer
1. Cartridge slots
2. Thumbscrews
3. Power switch
XEROX COAX/TWINAX OPTION
A3-7