C. Changing The Tray Sequencing Mode For Xes And Lj2D - Xerox 4213 User Manual

C. Changing the tray sequencing mode for XES and LJ2D

To change the tray sequencing mode for XES:
Press the Online button to take the printer off line.
H
Press the Menu button to access the Main Menu.
A
Press the Last Page button until the display reads EMULATION.
C
Press the Test button to display the available emulation headings. The display reads XES*.
B
Press the Test button to display the XES configuration headings.
B
01.
Press the Last Page button one time. The display reads TRAY SEQ MODE.
C
Press the Test button to display the tray sequencing options. The display reads TRAY 1.
B
Press the Last Page button until the display reads TRAY 1-2.
C
Press the Select button to select the option.
D
To change the tray sequencing mode for LJ2D:
Press the Menu button two times. The display reads EMULATION.
A
Press the Last Page button until the display reads LJ2D.
C
Press the Test button to display the LJ2D configuration headings.
B
01.
Press the Last Page button one time. The display reads TRAY SEQ MODE.
C
Press the Test button to display the tray sequencing options. The display reads TRAY 1.
B
Press the Last Page button until the display reads OPTIONAL.
C
Press the Select button to select the option.
D
Press the Menu button until OFF LINE appears in the message display.
A
Continue next page for procedures to save these tray sequencing settings.
XEROX 4213 LASER PRINTER USER GUIDE
This example shows you how to change the tray sequencing
mode default settings from tray 1 to tray 1-2 for XES, and tray 1-2
to HCF-tray 1 for LJ2D.
USING THE 4213 MENUS
The display reads COPIES
The display reads COPIES
3-47