Simple Screen; Reset Button; Compressor Protection - Radio Thermostat CT50 Operation Manual

Programmable communicating thermostat

Hide thumbs Also See for CT50:

Table of Contents

Simple Screen

This display mode limits the amount of information on screen and limits the functions to just the +/- arrows

and the MENU button. To set, with mode in OFF and ...

Hold down the PROGRAM button for 12 seconds to access the limited display screen.

Hold down the PROGRAM button for 12 seconds to leave the limited display screen.

The RESET button re-boots the CT50 processor. It does not effect the user programs that

have been stored in permanent memory.

The CT50 has a minimum cycle time of 4 minutes to protect your

compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and A/C

during this time and the compressor will not come on until the 4 minute delay is over.

Table of Contents

Show Quick Links

Table of Contents