Printed Circuit Board Removal And Replacement - Lincoln Electric RANGER 8 SVM107-B Service Manual

F-51
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this man-
ual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will aid the technician in removing the printed circuit board for main-
tenance or replacement.
MATERIALS NEEDED
5/16" Nut driver
1/4" Nut driver
Diagonal cutters
Wiring Diagram
This procedure takes approximately 20 minutes to perform.
TROUBLESHOOTING & REPAIR
PRINTED CIRCUIT BOARD REMOVAL
AND REPLACEMENT
WARNING
RANGER 8
F-51