Lincoln Electric RANGER 8 SVM107-B Service Manual page 85

F-45
BRUSH REMOVAL AND REPLACEMENT (continued)
SLIP RINGS
A slight amount of darkening and wear of the
slip rings and brushes is normal.
should be inspected when a general overhaul is
necessary. If brushes are to be replaced, clean
slip rings with a fine emery paper.
FIGURE F.10 - BRUSH LEADS/BRUSHES RETAINED WITH CABLE TIE
7/16" Brush
Assembly
Bracket Bolts
TROUBLESHOOTING & REPAIR
Brushes
RANGER 8
CAUTION
Do not attempt to polish slip rings while engine
is running.
Cable
Tie
Brushes
F-45