Specifications; Nail Selection - Hitachi NT 65MA3 Instruction And Safety Manual

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption

NAIL SELECTION

● Be sure to use only the genuine HITACHI nails for the
NT65MA3. The use of any other nails can result in tool mal-
function and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
15 Gauge finish nails
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
13-1/2" × 12" × 3"
(343 mm × 305 mm × 76 mm)
.042 ft
(1.20 ltr/cycle at 6.9 bar)
(1.20 ltr/cycle at 7 kgf/cm
WARNING
Dimensions of nails
Min.
4.2 lbs. (1.9 kg)
100 Nails
3
/cycle at 100 psi
.095" (2.4mm)
.072" (1.8mm)
English
2 )
2
)
Max.
9