Using The Flash - Canon PowerShot SX100 IS User Manual

Commonly Used Shooting Functions
165
p.
Using the Flash
. . See Functions Available in Each Shooting Mode (p. 222).
• . Sh()oting'V1odle' ... ' .
fB)
'i'
t&
~
ill
SCN*
cQ
P Tv Av M
*
Cannot be set in
II
mode.
Raise the flash manually.
Press the
~
button.
1. Use the .. or .. button to change
the flash mode.
II:
[Auto]
. U:
[On]
When you are not using the
flash, lower the flash until it
closes.
• ~ (flash off) appears in the LCD
monitor.
•
You are recommended to shoot with the camera attached to a
tripod or other device if the camera snake warning icon
[4]
appears.
When the flash recharging begins after shooting, the indicator
blinks orange and the LCD monitor turns off. When recharging
ends, the indicator turns off and the LCD monitor turns on. The
time required for flash recharging will change depending on
usage conditions and remaining battery power.