Setting The Auto Rotate Function - Canon PowerShot SX100 IS User Manual

1281
Various Shooting Methods
I
Setting the Auto Rotate Function
~~
I!I
See Functions Available in Each Shooting Mode (p. 222).
~"~~BltiiIIflll~li;j~J:~i!~~;i U> ~
t&
~
ilf
SeN
cQ"."
P Tv Av M
~
Your camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held vertically
and automatically rotates it to the correct orientation when viewing it in
the LCD monitor.
1
Select [Auto Rotate].
1. Press the
MENU
button.
2. Use the .. or .. button to select the
(jj
menu.
3. Use the ... or
+
button to select
[Auto Rotate].
2
Accept the setting.
. 1. Use the" or .. button to select [On]
or [Off].
2. Press the
II
MENU
] 1
button.
• When the Auto Rotate function is set
to [On] and the LCD monitor is set to
the detailed display mode in the shooting mode,
rlI
(normal),
f!1
(right end is down) or
rn
(left end is down) will appear in
the display.
• This function may not operate correctly when the camera is
pointed straight up or down. Check that the arrowM is
pointing in the right direction and if it is not, then set the Auto
Rotate function to [Off].
• Even if the Auto Rotate function is set to [On], the orientation
of images downloaded to a computer will depend upon the
software used to download the images.