Setting The Auto Rotate Function - Canon POWERSHOT a75 User Manual

Downloaded From camera-usermanual.com Canon Manuals
Shooting in Manual Focus Mode
The focus can be manually set.
1
Press the DISP. button to turn on
the LCD monitor.
2
Press the MF
button until
appears.
The indicator
appears.
The indicator shows
indicator
approximate figures. Use
them as a shooting
guideline only.
In the , , or modes, pressing the
SET button cycles the selection between the
shutter speed, the aperture value, and the
MF indicator. (A green appears next to the
selected item).
3
Focus using or and shoot
the image.
Shooting – Advanced Functions
Adjust the focus using or until the
image appears focused on the LCD monitor.
Pressing the MF button a second time
cancels the manual focus mode.
You can use manual focus in the macro
focal distance 5 to 46 cm (2.0 in. to 1.5
ft.) at wide angle end and 26 to 46 cm
(10 in. to 1.5 ft.) at telephoto end. In this
case, the fine scale is adopted.
You can change the MF indicator
displayed distance units (p. 71).

Setting the Auto Rotate Function

This camera is equipped with an Intelligent
Orientation sensor that detects the
orientation of an image shot with the camera
held vertically and automatically rotates it to
the correct viewing orientation in the display.
You can set this function on/off.
89