Troubleshooting And Repair; Scr Bridge Assembly Removal And Replacement - Lincoln Electric PRECISION TIG 185 SVM169-A Service Manual

F-39

TROUBLESHOOTING AND REPAIR

REMOVAL AND REPLACEMENT PROCEDURE
Service and repair should be performed by only Lincoln Electric factory trained
personnel. Unauthorized repairs performed on this equipment may result in danger
to the technician or machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and pre-
cautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to per-
form the test / repairs safely, contact the Lincoln Electric Service Department for
electrical troubleshooting assistance before you proceed. Call 1-888-935-3877.
TEST DESCRIPTION
This procedure will aid the technician in the removal and replacement of the SCR
assembly
MATERIALS NEEDED
5/16" nutdriver
3/8" nutdriver
Needle nose pliers
7/16" Wrench
3/8" Wrench
Slot head screwdriver
Dow Corning 340 Heat Sink compound
SCR BRIDGE ASSEMBLY
WARNING
PRECISION TIG 185
F-39