4:34 PM INTRODUCTION The One For All DVD Expert Universal Remote Control (URC-4041) is designed to remotely operate up to four home entertainment devices and features intuitive and easy-to use buttons to operate a DVD component. Its sophisticated technology will allow you to consolidate your original home entertainment remote controls into one easy-to-use product.
Use the illustration below to locate features on the One For All DVD Expert Universal Remote Control (URC-4041) and then study the Key Charts (on the next two pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 7.
IMPVE4P manual 1.0 4/11/03 4:34 PM Key Charts When the remote control is working and (after programming) is sending signals. Press DVD/VCR once to select a desired home entertainment device to control. Also see the Device Table on page 7. Press POWER the selected device.
Page 6
IMPVE4P manual 1.0 4/11/03 4:34 PM FEATURES AND FUNCTIONS Key Charts (continued) next higher (or lower) channel. Press MUTE off or on. In the DVD mode, press once to replay a selected chapter (after pressing lower) the sound volume. SLEEP a selected device if equipped with this feature.
NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 9. After programming, the One For All DVD Expert Universal Remote Control will be able to control the following types of devices: DEVICE KEY...
IMPVE4P manual 1.0 4/11/03 4:34 PM INSTALLING BATTERIES ❶ ❸ On the remote control’s back, push the tab and lift off the battery cover. Obtain two (2) new AAA alkaline batteries. Match the + and – marks on the batteries to the + and –...
4/11/03 4:34 PM PROGRAMMING DEVICE CONTROL The One For All DVD Expert Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable box, and a Pioneer audio receiver/amplifier. To control devices other than the default brands, perform the following steps;...
IMPVE4P manual 1.0 4/11/03 4:34 PM PROGRAMMING DEVICE CONTROL (continued) Aim the remote control at the device and press once. The device should turn POWER off. If it does not, repeat steps 2 through 5 (starting on the previous page), trying each code for your brand until you find one that works.
IMPVE4P manual 1.0 4/11/03 4:34 PM Aim the remote control at the TV and slowly alternate between pressing . Stop when the TV turns off (after pressing POWER NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
PROGRAMMING A MASTER POWER MACRO In its default state, the key on the One For All POWER DVD Expert Universal Remote Control will individually power your home entertainment devices on or off. However, you can also program a Master Power Macro onto the...
Macro is now cleared. USING KEYMOVER The One For All DVD Expert Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).
The blink twice. RE-ASSIGNING DEVICE KEYS The One For All DVD Expert Universal Remote Control can be set to control a second TV, PVR,VCR, DVD player, or other device. For example, to control a TV, a cable box,...
IMPVE4P manual 1.0 4/11/03 4:34 PM Press once, then press DVD/VCR will blink twice. key is now ready to be set up to control your second DVD player. See Programming Device Control on page 9. To re-assign other device keys to the steps 1 through 4 with a sequence from the below chart: NOTE: Only one device can be assigned to an unused device key at a time.
IMPVE4P manual 1.0 4/11/03 4:34 PM PROGRAMMING FAVORITE CHANNEL SCAN In the , or mode, you can store a list DVD/VCR CBL/SAT of up to 10 favorite channels, in any order, that will be immediately scanned when Channel Scan on the previous page). NOTE: Favorite channels can only be programmed for one mode.
IMPVE4P manual 1.0 4/11/03 4:34 PM CHANGING VOLUME LOCK The One For All DVD Expert Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be...
IMPVE4P manual 1.0 4/11/03 4:34 PM CHANGING VOLUME LOCK (continued) Unlocking All Volume Control (Restoring Default Setting) NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in DVD/VCR mode, etc.). On the remote control, press and hold until the (red light) blinks twice,then...
IMPVE4P manual 1.0 4/11/03 4:34 PM TROUBLESHOOTING PROBLEM: (red light) does not blink when you press a key. SOLUTION: Replace batteries with two new AAA alkaline batteries. PROBLEM: blinks when you press a key, but home entertainment device does not respond.
IMPVE4P manual 1.0 4/11/03 4:34 PM INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful inter- ference in a residential installation.
$3.95 to cover postage and handling. It will be repaired or replaced at the manufacturer’s option. The manufacturer reserves the right to substitute a currently manufactured model with equal or superior features. One For All: (330) 405-8655 URC-4041 April 2003...
One For All Big Easy 3-Device... . . URC-3300 One For All DVD Expert 4-Device ..URC-4041 One For All Big Easy 4-Device... . . URC-4330 One For All Access 4 .