General Instructions - KitchenAid Professional 600 Series Instructions And Recipes Manual

Hinged
Hub Cover
J
Attachment
Hub Socket
_Not part of mixer.
Attachment
Knob
/
Notch
Housing
Attachment
Power Shaft_t
_ Attachment
Housing
Pin
ent Shaft
General Instructions
To Attach
1. Turn speed control to OFF.
2. Unplug stand mixer.
3. Loosen attachment knob by
turning it counterclockwise.
4. Flip up hinged hub cover.
5. Insert attachment shaft housing
into attachment hub, making
certain that attachment power
shaft fits into square attachment
hub socket. It may be necessary
to rotate attachment back and
forth. When attachment is in
proper position, the pin on the
attachment will fit into the
notch on the hub rim.
6. Tighten attachment knob by
turning clockwise until
attachment is completely
secured to stand mixer.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
7. Plug into a grounded 3 prong
outlet.
To Remove
1. Turn speed control to OFF.
2. Unplug stand mixer.
3. Loosen attachment knob by
turning it counterclockwise.
Rotate attachment slightly back
and forth while pulling out.
4. Replace attachment hub cover.
Tighten attachment knob by
turning it clockwise.
12