Adjusting Numerical Values; Inserting And Removing Discs; Hard Button Only); How To Insert Discs - Clarion NX604 Owner's Manual

2
Select the relevant item from the
list.
If all indexes are not displayed, either
touch or or flick to move to
the next page.
❏ Adjusting numerical values
When and are displayed, numerical
values, volume, etc. can be adjusted.

Inserting and removing discs

(NX604 only)
To enjoy data in CD, MP3/WMA or DVD
discs, the disc must be loaded into the unit.
Attention
• Do not leave discs protruding from the
loading slot. Either insert them completely
or remove them.
• Do not touch the recording surface (shiny
side) of the disc.
• Do not insert two discs at the same time.
❏ How to insert discs
1
Insert the disc into the loading
slot with its label surface face
up.
10 NX604/FX503
The disc is drawn in. After a while, the
disc starts playing.
When the disc is inserted a short way,
it is automatically drawn in. If the disc
is not drawn in, this means that a disc
is already loaded.
Do not exert unnecessary force when
inserting discs. First remove the disc
that is already loaded, and then load
the new disc.
❏ How to remove discs
1
The disc is ejected.
2
Remove the disc.
MEMO:
• If a disc is not removed immediately, after
a while it is automatically drawn in again.
Inserting and removing the
microSD card (NX604)
To enjoy MP3/WMA data in microSD cards,
the microSD card must be loaded into the
unit.
Attention
• Insert and remove the microSD card after
turning off the unit, because the microSD
card might get damage.
• The map microSD card is already inserted
into the microSD card loading slot under
the slot cover.
If the map microSD card is removed, the
unit does not function. Do not remove or
insert the map microSD card except to
update map information.
• Do not touch the terminal surface of
microSD cards.
❏ How to insert the microSD card
1
Insert the microSD card into the
loading slot with its label surface
face up.
Firmly insert the microSD card as far
as it can go.
❏ How to remove the microSD
card
1
Grip the microSD card with your
fingers and pull it out.
To remove the microSD card, grip it
with your fingers and pull it out.
Inserting and removing the
microSD card (FX503)
Attention
• Do not touch the terminal surface of
microSD cards.
❏ How to insert the microSD card
1
Insert the microSD card into the
loading slot with its label surface
face down.
Firmly insert the microSD card as far
as it can go until you hear it click in
place.
❏ How to remove the microSD
card
1
Push in the microSD card.
The microSD card springs out slightly.
2
Remove the microSD card.
To remove the microSD card, grip it
with your fingers and pull it out. The
microSD card might spring out.