Battery Related Precautions; Replacing The Battery; How To Use The Remote Control; Names And Functions Of Remote Control - Clarion NX604 Owner's Manual

Battery related precautions

● Use only the specified battery. Do not
use other batteries.
Doing so might cause the battery to
burst or leak, or cause fire or injury, and
contaminate the surrounding area.
● When inserting the battery into the
remote control, pay attention to polarity
( and pole) and insert it as instructed.
Failure to follow instructions might cause
the battery to burst or leak, or cause
injury, and contaminate the surrounding
area.
● Do not heat or disassemble the battery,
or put it in fire or water.
Doing so might cause the battery to
burst or leak, or cause fire or injury.
● Do not carry the battery around or store
it together with metal ballpoint pens,
necklaces, coins, or other metal objects.
Doing so might cause the battery to
burst or leak, or cause fire or injury.
● Dispose of used batteries according
to predetermined methods and at
predetermined locations.
● Do not leave the battery provided with
the remote control within the reach of
small children or infants.
They might swallow them by mistake. If
you think that a small child or infant has
swallowed a battery, immediately consult
a physician.
38 NX604/FX503

Replacing the battery

Notice
• When using the remote control for the first
time, insert the battery provided with the
remote control.
1
Open the battery compartment
cover and remove the battery.
2
Insert the new lithium cell
(CR2032) with the mark
face up, and close the battery
compartment cover.

How to use the remote control

1
Operate the remote control with
it pointed at the remote control
sensor on the unit.
NX604
Remote control sensor
30 degrees 30 degrees
Remote control emitter
FX503
Remote control sensor
30 degrees 30 degrees
Remote control emitter
Operate the remote control with its
emitter pointed at the remote control
sensor within a range 30 degrees
above, below, left and right of the
sensor.
Names and functions of remote
control parts
Notice
• On the FX503, available buttons are as
follows:
SOURCE , BAND , VOL , VOL
,
• During telephone calls and when AUX is
selected, these cannot be operated.
1 AUDIO button
This switches the audio language of
DVD video and DivX.
button
2 SUB TITLE
This switches the subtitle language of
DVD video and DivX.
button
3 ANGLE
This switches the multi angle setting of
DVD video.
,