Chapter 2. Hardware Interface; Physical Description; Identification Of Ica-Hm316 Cable - Planet ICA-HM316 User Manual

2.1 Physical Description

2.1.1 Identification of ICA-HM316 cable

1. RJ-45 LAN socket: Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built
N-Way protocol can detect or negotiate the transmission speed of the network automatically.
Please use CAT-5 cable to connect the Network Camera to a 100Mbps Fast Ethernet network
switch or hub.
2. Power Jack: The input power is DC 12V.
NOTE: ONLY use package power adapter supplied with the Internet. Otherwise, the
product may be damaged.
3. I/O Control Instruction
I/O terminal connector – used in application, for e.g., motion detection, event triggering, alarm
notifications
4. Video Output
The internet camera also provides composite video output. User can use BNC video cable to
connect the internet camera with a TV monitor or VCR.
5. MIC in (audio in)
Connect a microphone to the network camera.
6. Line out (audio out)
Connect a loud speaker to the network camera. This is for voice alerting and two-way audio.
2 Mega‐Pixel Outdoor IR IP Camera
ICA‐HM316 / ICA‐HM316W
Chapter 2. Hardware Interface
10