Table of Contents
Advertisement
[Inserting the card]
Turn the SD card so that the front of the card
faces the rear of the transmitter and slide the
card into the card slot.
*Push in the card until it is firmly seated in the card slot.
[Removing the card]
When the SD card is pressed in once again,
the card will be released from the card slot.
and can be removed.
3. Close the battery cover.
SD card initialization
To use an SD card with the T14SG, the card
must first be formatted. Once formatted, the card
does not have to be reformatted. Formatting is
performed by the T14SG.
[IMPORTANT] When an SD card is formatted
f o r t h e T 1 4 S G , a l l p r e - e x i s t i n g d a t a i s
destroyed. Do not format a card containing
important data.
[Formatting procedure]
1. Insert the SD card into the SD card slot of the
T14SG.
2. T u r n o n t h e T 1 4 S G p o w e r . W h e n a n
unformatted card is inserted into the T14SG,
the screen shown below appears.
3. If the T14SG is ready to format, move the
cursor to [FORMAT] and touch the RTN
button. (To cancel formatting, move the
cursor to [CANCEL] and touch the RTN
button.)
4. Move the cursor to [YES] and touch the RTN
button.
* F o r m a t t i n g s t a r t s . D u r i n g f o r m a t t i n g , t h e [ N O W
FORMATTING...] message is displayed.
* W h e n f o r m a t t i n g i s c o m p l e t e d , T h e [ F O R M AT
COMPLETED] message is displayed. Depending on the
card capacity and speed, formatting may take as long as
several minutes.
20
<Before Use>
[IMPORTANT] Do not turn off the power until the
[FORMAT COMPLETED] message is displayed.
5. End formatting by touching the RTN button.
SD card reader/writer
Saving model data and update files (released
from Futaba) to the SD card from your own
PC, you can transfer those file to your T14SG
transmitter. Equipment for reading and writing SD
cards is available at most electronics stores.
Stored data
If you have a problem saving or reading data
after a long period of use, we suggest obtaining a
new SD card to avoid further difficulties.
*Futaba is not responsible for compensating any failure or
damage to the data stored in the memory card. As such, we
suggest that you maintain a backup of your important data
contained on your SD card.
Advertisement
Table of Contents
