Switch (Sa-Sh); Digital Trim (T1-T4); Volume (Ld, Rd); Slide Lever (Ls, Rs) - FUTABA 14SG S.Bus2 Instruction Manual

Switch (SA-SH)

(Switch Type)
• SA : 3 positions; Alternate; Short lever
• SB : 3 positions; Alternate; Long lever
• SC : 3 positions; Alternate; Long lever
• SD : 3 positions; Alternate; Short lever
• SE : 3 positions; Alternate; Short lever
• SF : 2 positions; Alternate; Long lever
• SG : 3 positions; Alternate; Short lever
• SH : 2 positions; Momentary; Long lever
*You can choose switch and set the ON/OFF-direction in the
setting screen of the mixing functions.
Digital Trim
T3
T4
Digital Trim T1, T2, T3 and T4:
This transmitter is equipped with four (4) digital
trims. Each time you press a trim button, the trim
position moves one step. If you continue pressing it,
the trim position starts to move faster. In addition,
when the trim position returns to the center, the
tone will change. You can always monitor trim
positions by referencing the LCD screen.
*You can select the trim step amount and the display unit
on the home screen on the T1-T4 setting screen within the
linkage menu.
Note: The trim positions you have set will be stored in the
non-volatile memory and will remain there.
Volume
LD RD
Volume LD and RD:
The volume LD and RD knobs allow for analog
input.
*The T14SG transmitter beeps when the volume knob reaches
the center position.
*You can use each setting screen of the mixing functions to
select volumes and define the direction of a movement.
Slide Lever
LS (Left), RS (right):
The slide lever LS and RS offer analog input.
*The T14SG transmitter beeps when the lever comes to the
center.
T2
T1
*You can select a slide lever and set the movement direction
on the setting screen of mixing functions.
HOME/EXIT and U.MENU/MON. Button
HOME/EXIT
HOME/EXIT:
It pushes from HOME
Push and hold for one
(1) second from HOME
U.MENU/MON.:
LS RS
U.MENU/MON.
Button Button
Press Return to the previous screen
Press and hold Return to the Home screen
To TELEMETRY display
screen.
Key lock On or Off
screen.
Press To SERVO MONITOR display
Press and hold To User Menu display
<Before Use> 15