Lincoln Electric LN-15 WIRE FEEDER SVM166-A Service Manual page 77

F-39
TROUBLESHOOTING AND REPAIR
REMOVAL AND REPLACEMENT PROCEDURE (Continued)
Figure F.15 - COVER AND SPINDLE MOUNT SCREW LOCATION
REPLACEMENT PROCEDURE
1. Replace all leads to switches and
solenoid.
2. Maneuver assembly into case.
3. Connect gas hose to conductor block.
4. Replace five mounting screws.
5. Replace bolt into top of case.
6. Replace the electrode cable into the
cord grip. Replace and tighten the nut.
COVER AND SPINDLE MOUNT
LN-15
1/2" Bolt
F-39