Sending A Message; Receiving A Message - Motorola GM160 User Manual

u
3 to select
Status
y z
4 or to locate the desired status in
the pre-programmed list.
–
or– when using the keypad microphone
only,
enter the number of the status you wish to
send.
–
or– if programmed by your dealer (see
pages 5 -6),
press the button that has been
preprogrammed for a specific status.
Note: You cannot retransmit the current
status update.

SENDING A MESSAGE

This feature gives you the ability to send and
receive preprogrammed messages. Data
messages make more efficient use of channels
compared to voice transmissions. Messages of
up to 14 characters may be programmed by
your dealer.
English 18
To send an electronic (data) message:
u
1 to enter Menu Mode.
y z
2 or until Message
u
3 to select
Message
y z
4 or to locate the desired message in
the preprogrammed list.
–
or– when using the keypad microphone
only,
enter the number of the message you wish to
send.
–
or– if programmed by your dealer (see
pages 5 -6),
press the button that has been
preprogrammed for a specific message.

RECEIVING A MESSAGE

When your radio receives a message:
• You will hear two alert tones.
• The LED indicator flashes yellow.