Activating Con@ctivity 2.0
Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
to be used, the cooktop must be fitted
with the Con@ctivity dongle.
Please read the instructions for the
Con@ctivity 2.0 dongle before instal‐
lation.
Activating Con@ctivity 2.0
In order to use the Con@ctivity 2.0
function, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
operational.
You only need to carry out the activa‐
tion procedure once. If the appliances
are disconnected from the electricity
supply, during a power cut for example,
they will still remain activated.
To establish the radio connection, the
rangehood and cooktop must be acti‐
vated at the same time.
First activate the rangehood, then the
cooktop.
50
Activating the rangehood
Switch off the fan, cooktop lighting
and cooktop.
Press the run-on option control
515 for approx. 10 seconds until
the indicator for the power setting 1
lights up.
Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
If Con@ctivity 2.0 has not been activa‐
ted, the indicators for settings 2 and 3
will flash at the same time.
To activate Con@ctivity 2.0, touch the
"" control.
2 will light up constantly and 3 will
flash. The search for a signal starts.
Meanwhile, start the activation of the
cooktop.
Activating the cooktop
While the rangehood is searching for
the radio connection, start activating
the cooktop.
More information about this can be
found in the operating instructions for
the cooktop.
When the radio connection has been
established, 2 and 3 will light up con‐
stantly on the rangehood.
Confirm activation of the rangehood
with the run-on option control 515.
All indicators will go out.
Confirm the activation on the cook‐
top.