Closing The Filler Cap; Cold Start Button - Husqvarna 2014 FC 250 EU Owner's Manual

6 CONTROLS
6.10

Closing the filler cap

6.11

Cold start button

–
Turn filler cap
B01832-10
–
Mount filler cap
Info
Run the fuel tank breather hose
B01833-10
The cold start button
The injection system extends the injection time if the engine is cold and the outside tem-
perature is low. To help the engine burn the increased amount of fuel, it must be sup-
plied with additional oxygen by pulling the cold start button.
Possible states
The cold start button is activated – The cold start button is pulled out all the way.
•
The cold start button is deactivated – The cold start button is pushed in all the way.
•
B01834-10
1 counterclockwise and lift it off.
1
and turn it clockwise until the fuel tank is tightly closed.
2
1
is fitted on the left on the throttle valve body.
without kinks.
13