Datalogic PowerScan D8340 Quick Reference Manual

Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
2007-2014 Datalogic, Inc.
©
An Unpublished Work - All rights reserved. No part of the contents of this
documentation or the procedures described therein may be reproduced or
transmitted in any form or by any means without prior written permission of
Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or "Datalogic ADC").
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own
internal business purposes. Purchaser shall not remove or alter any proprietary
notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed
versions by contacting your Datalogic representative. Electronic versions may
either be downloadable from the Datalogic website (www.datalogic.com) or
provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please let us
know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U. All other brand and product names may be trademarks of their
respective owners.
PATENTS
This product may be covered by one or more of the following patents.
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK
0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2;
5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1;
6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971
B1; 1,816,585 B1; 1,942,442 B1.
Additional patents pending.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log
on to www.datalogic.com and click on the links indicated for further information
including:
•
PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities including:
- Datalogic Aladdin™, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
•
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and
Technical Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
•
CONTACT USInformation Request Form and Sales & Service Network
ELECTRICAL CONNECTIONS
The PowerScan™ D8340/D8340 AR scanner can be used with CAB 468 (coiled cable and 9-
pin male connector) for direct connection to the DATAPLUS and DLD series decoders.
CAB 468
1 - Not connected 5 - TRIGGER
1 2 3
4 5
2 - SCAN 6 - BEEPER/LED
3 - Not connected 7 - VIDEO
6 7 8 9
4 - GND 8 – LASER ON
9 - +VCC
9-pin male connector
PowerScan™ D8340
READERS
QUICK REFERENCE GUIDE
820035814 (Rev. F) June 2014
CHINA ROHS STATEMENT
CONNECTIONS
CONNECTING THE CABLE
A. Rubber gasket
B. Plastic boot
C. Cable spacer
D. Cover
E. Strain relief
1. Slip the cover over the cable.
Align
2. Push the plastic boot into the
rubber gasket. Take care that
the tab on the plastic boot is
aligned with the notch in the
rubber gasket.
3. Push the plastic boot and gasket
into the handle. Ensure that the
"Front" marking on the plastic
Arrow
boot is facing out, with the
arrow pointing towards the
front of the scanner.
4. Insert the cable into the socket
of the plastic boot.
5. Insert the cable spacer into the
cable wire and slide it towards
the handle.
6. Push the cover along the cable
towards the reader, and hook it
over the yellow "tooth".
7. Insert the strain relief into the
cover and tighten the screw to
fix the whole assembly to the
reader handle.
COMPLIANCE
LASER SAFETY COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at
the date of manufacture.
The laser light is visible to the human eye and is emitted from
the output window (1).
Laser warning and classification label (2).
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with any very
strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through
reflective surfaces such as mirrors, etc.
The following information is shown on the laser scanner device class label:
LUCE LASER
ITALIANO
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2
RAYON LASER
FRANÇAIS
EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2
LASERSTRAHLUNG
DEUTSCH
NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2
RAYO LÁSER
ESPAÑOL
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2007.
TECHNICAL FEATURES
POWERSCAN™ D8340/ D8340 AR
Electrical Features PowerScan™ D8330
Power Supply
Max. Consumption: 0.076 mm (3 mils)
@ 4V 420 mA
@5V 310 mA
@30V 62 mA
Sleep mode 4 mA
Scan Rate
Good Read LED (green)
Reading Indicators
Good Read Spot (green), Beeper
Optical Features
Notch
Reading Field 97.8 cm (38.5 in)
(Typical performance at 20ºC / 68ºF @ 40 mils
on high quality barcodes)
Max. Resolution 0.076 mm (3 mils)
PCS (Datalogic Test Chart) 15%
Tab
Laser Features
Power (max) 0.9 mW
Scan Angle 42°
Laser Safety Class Class 2 EN 60825-1/CDRH
Environmental Features
Working Temperature -30 °C to + 50 °C / -22° to +122 °F
Stora perature -30 °C to + 70 °C / -22° to +158 °F
Humidity
Drop Resistance IEC 68-2-32 Test ED 2 m
Protection Class
Mechanical Features
Weight (without cable)
Cable Length
CE COMPLIANCE
Warning:This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could
void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power
directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked "Class 2" or LPS
power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to the reader via the power
connector of the cable.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and Electronic Equipment
www.datalogic.com.
(WEEE), please refer to the website at
USING POWERSCAN™ D8340 SERIES READERS
PowerScan™ D8340 readers automatically scan barcodes at a distance. Simply aim and
pull the trigger. Code scanning is performed along the scan line emitted from the reading
window. This line must cross the entire code. The best reading angles are indicated in the
figure below.:
PowerScan™ D8330
AR
4 to 30 VDC
0.25 mm (10 mils)
500 mA
370 mA
70 mA
4 mA
35 ± 5 scans/sec
12.5 m (41.0 ft)
@ 100 mils reflective
0.178 (7,5 mils)
25%
1.3 mW
13.5° ± 0.7
90% non condensing
IP65
about 295 g (10.4 oz)
2 m (6 ft 6 in)