Induction; The Induction Principle - Miele KM 6395 Operating And Installation Instructions

The induction principle

Induction coils are located underneath the ceramic surface.
These coils create a magnetic field when the cooktop is
switched on and a pan is placed on the surface. This
magnetic field works on the base of the pan and heats it up.
The ceramic surface heats up indirectly by the heat given off
by the pan.
Induction heat only works when a ferromagnetic pan is
placed on the ceramic surface (see "Pans"). The induction
cooking zone automatically recognises the size of the pan
Induction heat will not work
– if the pan is unsuitable (non-magnetic base).
– if the diameter of the base of the pan is too small.
– if the pan is taken off the cooktop when it is switched on.
If no pan or an unsuitable pan is placed on the ceramic
surface, the cooktop will switch off automatically after a few
minutes.
Danger of burning.
Do not use the cooktop as a resting place for metal items
(e.g. cutlery). When the appliance is switched on either
deliberately or by mistake, or when there is residual heat
present, there is the risk of the metal items heating up,
with the danger of burning.
Switch the cooktop off after use.

Induction

15