Lincoln Electric CV-655 Technical Specifications page 2

A CLOSER LOOK
PERFORMANCE
• Provides line voltage compensation for maintaining weld consis-
tency, even with changes of ±10%.
• For heavy duty MIG and flux-cored applications.
FEATURES
• Quick, simple 14-pin MS-type (Amphenol) wire feeder connection.
• Low flat-top case can be placed under a workbench or stacked
on top of each other for smaller footprint.
Key Controls
1. Optional Voltmeter and Ammeter
2. Output Voltage Control
3. Pilot Light
4. Thermal Protection Light
5. Input Power On/Off Switch
6. Local/Remote Control Switch
7. Output Terminals On/Remote Switch
QUALITY AND RELIABILITY
• Electronic and thermostatic protection from current overload
or excessive temperatures.
• PC boards have built-in diagnostic routines for quick and easy
troubleshooting.
• Circuit boards are protected with a specially insulated coating to
extend life and ensure reliable performance.
SYSTEM SELECTION
Typical MIG Welding Systems
CV-655 / LF-72 Heavy Duty Wire Feeder
• CV-655 Power Source
• LF-72 Heavy Duty
• 600 Amp Weld Power Cable – 10 ft.
• Work Clamp
• Harris® Flowmeter Regulator and Gas Hose K586-1
CV-655 / LN-742 Wire Feeder
Best for applications where more process control is required – for
arc starting, welding and crater control!
• CV-655 Power Source
• LN-742 (Two Roll) Wire Feeder
• Control Cable - 10 ft.
• .045 Drive Roll
• Universal Stand
• Swivel Platform
• Magnum 400 Gun & Cable Assembly
• 600 Amp Weld Power Cable – 10 ft.
• Work Clamp
• Harris Flowmeter Regulator and Gas Hose
• Sub-arc welding with up to 5/64" (2.0mm) diameter electrodes.
• Arc gouging up to 3/8" (10mm) carbons.
• "Cold" electrode with a solid state contactor when the trigger
is released for added safety.
• Thermal trip indicator light.
• Solid state circuitry provides extra long life during repetitive
applications.
• Three-year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• CSA approved for 60 Hz models.
CV-655 / LN-10 Wire Feeder
K1480-1 Where premium welding performance and control is demanded –
K2327-3 this system delivers!
(2)
K1842-10 • CV-655 Power Source
K910-2 • LN-10 wire feeder
• Control Cable – 10 ft.
• .045 Drive Roll
• Swivel Platform
• Magnum 400 Gun & Cable Assembly
• 600 Amp Weld Power Cable – 10 ft.
K1480-1 • Work Clamp
K617-1 • Harris Flowmeter Regulator and Gas Hose
K1819-10
KP653-052S
K1524-1
K1557-1
(1)
K2286-1
(2)
K1842-10
K910-2
K586-1
[2]
1. 2.
3.
4.
5.
6.
7.
K1480-1
K1559-1
K1501-10
KP1505-045S
KP557-1
(1)
K471-21
(2)
K1842-10
K910-2
K586-1
CV-655
www.lincolnelectric.com