Panasonic CF-72 Series Reference Manual page 69

Dealing With Problems
Connecting Peripherals
The address map for IRQ,
I/O port address, etc. is
unclear
A USB device does not
work
It is not easy to hear of the
microphone sound
Windows NT
IrDA does not work
Windows NT
Some devices do not
work
Windows 98
Check the address map by going to [View Resources] in [Start] - [Settings] - [Control
Panel] - [System] - [Device Manager] - [Computer] - [Properties].
Windows NT
Select [Start] - [Programs] - [Administrative Tools (Common)] -[Windows NT Diag-
nostics] to see the present conditions.
Windows 2000
Check the address map by going to [View] - [Resources by type] in [Start] - [Settings]
- [Control Panel] - [System] - [Hardware] - [Device Manager].
Windows 98 Windows 2000
Make sure a driver is installed.
Contact the manufacturer of the product.
Windows NT
USB devices are not supported.
1 Double click on the task tray.
2 Select [Options] - [Properties].
3 Check [Playback], and add the check mark
4 Select [Options] - [Advanced Controls].
5 Press [Advanced] in [Microphone].
6 Add the check mark
7 Click in the top of right corner of the window.
Separate communications software is necessary.
Press F9 in the Setup Utility.
(Advanced)
for [Microphone], then press [OK].
for [+20dB Gain], then press [Close].
69