Standby/Hibernation Functions - Panasonic CF-72 Series Reference Manual

Standby/Hibernation Functions

Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the standby or hibernation function.
Differences between the standby and hibernation functions
Function Standby function
Where data is saved to Memory
Speed Fast
Requires power supply Yes
NOTE
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode be used instead of the standby mode.
Setting the Standby or Hibernation Function
Windows 98 Windows 2000
1
Select [Start] - [Settings] - [Control Panel] - [Power Manage-
ment]*, in [Hibernate] add the check mark for [Enable hiber-
nate support] and press [Apply]
* Windows 2000 : [Power Options]
2
In [Advanced], select [Standby] or [Hibernate] for [When I
press the power button on my computer] and press [OK]
NOTE
The operation of the computer when the LCD is closed can also be set in [Ad-
vanced].
Windows NT
[Off] is factory set.
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
Enter
5
Press F10 and select [Yes], then press Enter
(if power is cut, all data is lost)
( page 54)
, select [Power]
, select [Power Switch] and press Enter
, select [Standby] or [Hibernation] and press
Hibernation function
Hard disk
Somewhat slow
Power is not required to maintain data
12